BACK

PCS-400 series pure polyureas are formulated for hand or airless spray applications where the performance  of polyurea is required, but where conventional spray polyurea applications are not possible. PCS-400 series polyureas provide a 15 to 20  minute  working time and 1.5-2 hr tack free. PCS-400 series are aliphatic in  nature and UV– color stable. The products are excellent as a color fast top coat over PCS-300 series polyurea, for flooring, traffic striping, and areas where conventional polyurea spray is difficult. PCS-400 is a  more rigid formulation, while PCS-410 offers an elongation of 60 %. PCS-400 series hand applied polyureas are available in standard colors and are packages in kits or 55 gallon drums.

Surface must be properly prepared. Concrete surfaces prepared according to NACE standard RP0892-92.  Steel surfaces must be a “near white metal” blast to SSPC-SP-10 with a 4 mil profile.  All surfaces must be free from dust, rust, moisture and other oils and contaminates.  Concrete surfaces must be primed with PCS-30 series primer, adhesion  promoter.   See PCS-30  bulletin for application conditions.

Combine component A and B according to specification and mix thoroughly. For airless spray, do not exceed 1 gallon of A and B in holding tanks.

PCS-400 series can be applied by phenolic knap roller, squeegee, or airless spray. See PCSI application specifications.

Please consult PCSI for specific application specifications.

Note: working time is defined as the time the product is low enough in viscosity to apply without rolls or drag. It is dependent on temperature and is NOT pot life. Acclimate PCS-400 series to between 65 and 75 oF for 72 hrs prior to applying.  keep PCS-400 series components below 80 oF prior to application.

Consult PCS-400 series A/B MSDS before using material.   Use proper ventilation and respiratory equipment when spraying. Protect skin and eyes. Follow disposal methods in accordance with local and federal disposal regulations.

Polyurea Coating Systems maintains a full technical support staff and testing  facilities.  PCSI also offers on site analysis and  consultation for your projects.  Please contact PCSI for additional details on how we may tailor your application needs.

The information contained herein is based on data available to Polyurea Coating Systems, inc. and is believed to be reliable. Since this information, in part, may have been obtained from independent laboratories, or other sources not under our direct     supervision, no representation is made that the information is accurate, reliable, complete or representative.  We make no       guarantee the health and safety precautions Polyurea Coating Systems, Inc. has suggested will be adequate for all individuals and/or situations involving it’s handling and use.  Polyurea Coating Systems obligation shall be to replace or pay for any raw material proved defective.  Beyond the purchase price of the material supplied by Polyurea Coating Systems, we assume no liability for damages of any kind and the user accepts the products “as is” and without warranties expressed or implied.  The suitability of the product for an intended use shall be solely the users responsibility.  Users assume all risk and liability whatsoever in connection therewith.

BACK